1. When the garden branch crusher is working, the staff should avoid the tangential direction of the hammer rotation, do not allow to wear gloves for feeding, hand can not cross the safety line, and prevent the replacement of hand feeding with iron and sticks.

 

2. Landscape branch crusher and power unit should have stable equipment. If the wood crusher is fixed for a long time, it should be fixed on the cement level; if the wood crusher is active, the unit should be equipped on the seat, and ensure that the power machine and the belt groove of the wood crusher are in the same rotary plane.

 

3. After the gardening branch crusher equipment is finished, it is necessary to check the fastening condition of each component. If loosening marks are found, they should be tightened. Is it appropriate to repair belt tightness together?

 

4. Before the suggestion of garden tree branch crusher, first rotate the rotor by hand to repair the movement of the claws, hammers and rotors. Is there any knock in the shell? Is the direction of the rotor changing along with the direction indicated by the arrow of the machine? Is the power machine and the wood crusher smooth or superb?

 

5. Don't change the pulley at will, in order to prevent the damage chamber from blasting because of the high speed, or the low speed will affect the working efficiency of the garden tree branch crusher.

 

6. It is suggested that the garden branch crusher should rotate for 2 to 3 minutes before feeding without abnormal appearances.

 

7. In the work, we should always pay attention to the movement of the wood crusher, uniform feeding, in order to prevent congestion, not long-term overload work. Assuming that vibration, noise, bearing and body temperature are too high and spraying material outward, it is necessary to stop the machine immediately and repair the defect before continuing to work.

 

8. When presenting obstruction, stop the machine immediately to forcibly feed with stick or hand or pull out the feed to be made without stopping the machine, so as to avoid injuring the arm or damaging the machine parts by the wood mill.

 

9. If the hard material is damaged, the operator should wear glasses.

 

10. The workplace should be air-conditioned and prevent fireworks.