Charcoal Rod Making Machine is the main equipment to make stick solid fuel with such wood material as bits of wood, rice shell or peanuts shell, etc.Briquette diameter of the stick by the Charcoal Rod Making Machine is 50mm.
The raw material is sawdust,crop straw, wood branches, rice hull, bamboo sawdust, peanut shell, coconut shell, sunflower shell, furfural dregs, cotton stalks, corn stalks, sesame straw, corncob ,shrubs broken branches, twigs, bark, scraps of furniture factory.
1. No need any binder and chemical product.
2. Density higher:The raw material density is generally about 130kg/m3, and the density of formed charcoal bar is 1100-1400kg/m3.
3. The charcoal bar size is one over ten of the original, but its combustibility has been improved greatly.
4. These charcoal bars can replace coals for producing and living, and the thermal efficiency is enhanced by 30%-40%.
It is a good thing for environment protection and the reuse of agriculture wastes are also advocated by the government. HongRun has developed a new set of charcoal production line, which helps a lot on environment protection.
The charcoal making machines can crush the materials into particles with size within 10mm, get the particles dried, then mold the materials into shapes and last get the formed material carbonized in the carbonization furnace. The charcoal produced by Hongrun charcoal equipments has the following features: big density, small size, good flammability, and it can totally replace firewood and coal. The product is especially suitable for the cold region for daily life heating, greenhouse heating or for normal household fuel.
The charcoal equipment includes crusher(grinder), dryer, rods machine, carbonization furnace and auxiliary equipments. And the charcoal production process can be material crushing, drying, rods molding and carbonization. The rods machine and dryer are the main equipment for the charcoal manufacture. hongrun dryer has the advantages of automatically feeding, one time fully drying, no material loss in feeding port or discharge port and it can suport 4 rods machine production at same time. hongrun rod machine(log machine) has automatic temperature control system which controls rod density. With this technology, the quality of rods/logs can be guaranteed. Materials like branches, leaves, sawdust and other agricultural products are viable for charcoal production, and the final product can even replace coal, so people called this new fuel "straw coal''.
The operation flow of charcoal production: material collection--material cutting--feeding(automatically metal removal)--press--molding--extrusion--cooling--transport--civil use or small boilers--biomass power plant.
Related product:Charcoal Rod Production Line
Email:evelyn@cncharcoalmachine.com
The raw material is sawdust,crop straw, wood branches, rice hull, bamboo sawdust, peanut shell, coconut shell, sunflower shell, furfural dregs, cotton stalks, corn stalks, sesame straw, corncob ,shrubs broken branches, twigs, bark, scraps of furniture factory.
1. No need any binder and chemical product.
2. Density higher:The raw material density is generally about 130kg/m3, and the density of formed charcoal bar is 1100-1400kg/m3.
3. The charcoal bar size is one over ten of the original, but its combustibility has been improved greatly.
4. These charcoal bars can replace coals for producing and living, and the thermal efficiency is enhanced by 30%-40%.
It is a good thing for environment protection and the reuse of agriculture wastes are also advocated by the government. HongRun has developed a new set of charcoal production line, which helps a lot on environment protection.
The charcoal making machines can crush the materials into particles with size within 10mm, get the particles dried, then mold the materials into shapes and last get the formed material carbonized in the carbonization furnace. The charcoal produced by Hongrun charcoal equipments has the following features: big density, small size, good flammability, and it can totally replace firewood and coal. The product is especially suitable for the cold region for daily life heating, greenhouse heating or for normal household fuel.
The charcoal equipment includes crusher(grinder), dryer, rods machine, carbonization furnace and auxiliary equipments. And the charcoal production process can be material crushing, drying, rods molding and carbonization. The rods machine and dryer are the main equipment for the charcoal manufacture. hongrun dryer has the advantages of automatically feeding, one time fully drying, no material loss in feeding port or discharge port and it can suport 4 rods machine production at same time. hongrun rod machine(log machine) has automatic temperature control system which controls rod density. With this technology, the quality of rods/logs can be guaranteed. Materials like branches, leaves, sawdust and other agricultural products are viable for charcoal production, and the final product can even replace coal, so people called this new fuel "straw coal''.
The operation flow of charcoal production: material collection--material cutting--feeding(automatically metal removal)--press--molding--extrusion--cooling--transport--civil use or small boilers--biomass power plant.
Related product:Charcoal Rod Production Line
Email:evelyn@cncharcoalmachine.com
