Carbon machine is also called charcoal machine, mainly the use of corn stalks, corn cob, leaves, branches and sawdust and other crops as raw materials for charcoal. Charcoal machine to achieve the recycling of waste, while the charcoal can be made into a new fuel instead of coal. So the study and use of charcoal machine has far-reaching significance. At the same time charcoal machine also has five advantages. The five major advantages of the charcoal machine in the carbon industry to go further farther.
There are five major advantages of charcoal machine: one is the carbonization speed. Free kiln technology, 24-hour water production, the venue is not limited. Two is the high yield. Carbon machine quality is good, the output is high. Three is very little maintenance. Carbon machine only need about half a year maintenance can be. Four is ultra-low power consumption. The average power consumption per set of equipment is about three kilowatts per hour. Five is extremely simple operation skills. Only two simple operation process can be made out of the product, the equipment can be installed within three days after the normal shipment.
Mechanism charcoal production process, the important process is the rod and carbonization process. Mechanism charcoal machine on the rod and carbonization process has a very high demand. Different carbonization stages require different problem setting. If the temperature control is not good, this will directly affect the quality of the mechanism charcoal machine finished product. So different mechanism charcoal machine different carbonization process in the good temperature set how much?
Drying stage due to the pyrolysis temperature is very slow, so the temperature should be controlled at 130-160 °.
In the pre-carbonation stage, the wood material begins to change due to the obvious comparison of the pyrolysis reaction of the material, so the temperature of this stage should be controlled at 160-280 °.
Carbonization stage, also known as the thermal reaction stage, wood materials, the pyrolysis of the obvious comparison of the carbonization stage of the temperature should be controlled at 280-450 °.
This stage of the calcination stage is due to the external supply of heat for charcoal calcination, so the calcination stage of the temperature should reach 450-500 °.
The stage of carbonization is an important stage in the carbonization process of this stage, and it is also a stage of high temperature. Therefore, the temperature of the practice stage should be 500-1300 °.
